What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
12.06.2025 01:04

These are simplified answers to the original question, and does not change anything I wrote above.
He then describes Rainy Season and Lightning.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Has a psychic ever made a crazy prediction that turned out to be true?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
An AC voltage/ current source, and an ac inductive load.
I post the exact comment here.
Pacific sediment cores unlock millions of years of climate history - Earth.com
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This device then solves the entire problem.
eight
Why do a lot of autistic people not know how to style their hair?
A circuit breaker is similar, but is resettable.
2024–10–14 [Omar Gharbi Omar Gharbi ]
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Gina Ortiz Jones, a Progressive, Is Elected San Antonio’s Mayor - The New York Times
What is lightning?
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
What are some common examples of condescending behavior?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
There are three different concepts here that are getting confused.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Microsoft Confirms Password Deletion—Now Just 8 Weeks Away - Forbes
(Dc diagram shown, AC is similar).
what exactly is a ‘surge’ protector?
But it can get overloaded, and no longer works.
ESA supports Moon mission carrying first European rover - European Space Agency
a photo is worth a thousand words.
This is where the MOV conducts again, and dissipated the energy.
He then asserts :
Here is a simplified AC power diagram.
This one hit behind the barn.
These devices are installed between the “hot” and “neutral” and protective ground.
Two space vets added to Astronaut Hall of Fame as one awaits launch - collectSPACE.com
One
the problem then depends on "how fast does the fuse operate?".
For this case there are devices called Metal oxide varistors (MOV).
Science-Backed Tips for Increasing Your Stamina at Any Age - Prevention
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This is where this question deviates from being a 'generic' question, and becomes more specific.
There are two important concepts here.
Nvidia, Other Chip Stocks Slide Amid Worries About US-China Trade Tensions - Investopedia
One is “what exactly is in a ‘surge protector’ ? ”
In schematic diagrams this is the symbol for a fuse:
So, the voltage could go up to 500 volts, and the fuse will not open up.
Don't Make This Mistake When Setting Up Your Switch 2 - Kotaku
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
so, what happens?
At one ohm, the resistor has a maximum of 1 watt power.
Do people have to be a pastor to baptize?
[old diagram got deleted by accident]
He then describes the function of a fuse.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Edit 2024–10.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
A fuse is a non-resetable over current circuit protector.
Upvotes:
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–16 [ OO OLAOYE OYEBODE ]
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
It seems Mohan does not understand the difference between a comment and an Answer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
nine
2024–10–10[John johnson John Johnson ]
What does a fuse do?
The bolt then partially travels down the line to your home.
Now when you have a certain ac resistance, then a current flows in a loop.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
The other is “what does a “fuse” do?”
[image of Common-mode choke]
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The MOV will conduct when the voltage exceeds 50% of line voltage.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Because the load is inductive, the current lags the voltage.(by a bit).
At least they know the answer if they wanted it.
The third is lightning and “how it gets conducted into a home.”
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
First Sentence:
but I think this circuit , shows a few more pieces.
It also is a device that limits the change in current flow.
but this device (an Inductor) … impedes the rapid changes in the current.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is 'the assistant's answer'
Barnstars: